德国GESIPA计数监控功能气动铆钉枪TAURUS versionsTAURUS with setting process monitoring-恩庆智能科技（上海）有限公司

德国GESIPA计数监控功能气动铆钉枪TAURUS versionsTAURUS with setting process monitoring

更新：2018-04-01 23:55:54 点击：

品牌：
型号：

产品介绍

该工具将安装一个特制的传感器，与一个外部程序装置连接，则可得到可靠的铆接数量和可靠的紧固质量的评估。

传感器只是安装在断掉的心轴罐前部，记录每个心轴喷出物。通过局部的计数装置GRivCount完成信号的传输，或者通过中央系统界面的放大器GRivAmp远程控制。

The tool is equipped with a sensor which detects the evacuation of the spent mandrel after the setting process is complete. The sensor is installed just in front of the mandrel container and connected either to a local control and display unit GRivCount or to a centralized monitoring system via the line amplifier GRivAmp.

INTERFACE GSPS-IF FOR BLIND RIVETING TOOL TAURUS® 1-4 C WITH INTEGRATED SETTING PROCESS MONITORING

Buffer amplifier with time response GRivAmp Artikel-Nr.: 7561101

TAURUS tools for stationary use in production systems

The TAURUS tools can be integrated as stationary units in automatic production systems, and operated by remote control if required.
The presence of the blind rivet in the nosepiece can optionally be detected with the aid of a low-pressure connection.
The spent mandrel can be disposed of by means of an evacuation tube if required, and also monitored by a sensor.
In such stationary production systems, several tools can be operated automatically and simultaneously, enabling a high level of efficiency.

The setting process monitoring is achieved by a direct on-line analysis of traction force and traction course recorded during the setting of the rivet. All system components necessary for operation are included in the tool itself. The setting analysis takes less than 1 microsecond and its result is directly displayed by a green or red LED installed in the tool base and, optionally, by a warning tone.Moreover,a collective analysis of the complete work piece is also included. The tool stores more than 260.000 individual setting processes, which can be recalled at any time. The system also identifies failure patterns and memorizes those for failure analysis and troubleshooting. The tools can be operated as stand-alone or as part of integrated production systems using the GESIPA® interface.

更多产品